
28" DTH HAMMER
Matched Bit shank: TK28,NUMA280
Hole Range: 600mm-1000mm
Application: Oil and gas open hole drilling
Foundation and piling drilling
TEAMWHOLE 28INCH DTH HAMMER
Teamwhole manufactures wide range and most efficient Down-the-Hole (DTH) hammers and bits for the mining blasting,water well especially deep well drilling,foundation construction etc.Our prodcuts trust by drilling contractor because of the advantages
1.System introduction
To drilll through overburden and into bedrock,The large diameter DTH hammer used on dual-power drill rig, is a better way to save cost than using casing drilling tools.It is applied for drilling through cave, gravel, boulder, weathered bedrock, with single hole depth over 25m.This method is widely used for embedded prefabrication piles,long spiral piles and large diameter end bearing piles.
2.Features
Widely applied for complex rock formations like caves,pebbles, fissures etc.
Drilling through hard rocks with high rate of penetration.
Low air consumption.
3. Advantages
Simple structure without inner cylinder ensure high reliability caves,pebbles, fissures etc. and easy maintenance.
Customized DTH bit steel,reduces rate of body broken and cracking failure.
Fixed position for the stabilizer for,easy modification.
Structure-----28"DTH HAMMER WITH FOOT VALVE | ||
| ITEM Discrimination | |
Part List | ||
1 | TOP SUB(Can insert carbides) | |
2 | TOP SUB RING | |
3 | STEEL RING | |
4 | CHECK VALVE | |
5 | SPRING | |
6 | BELEVILLE RING | |
7 | CHECK VALVE GUIDE | |
8 | FEED TUBE | |
9 | PISTON | |
10 | OUTER CYLINDER | |
11 | BIT RETAINER RING | |
12 | STEEL RING | |
13 | CHUCK SLEEVE |
![]() ![]() ![]() |
NUMA280
Tag: down-the-hole hammer, dth hammer, drill toolsChina, suppliers, manufacturers, customized, price, high quality
#DTH Hammer #dth bit #dth drilling #button bit #water well drilling #drilling #drill rig#Patrilot240#Hyper